来源：http://www. 发布时间：2020天天彩票网站-06-04 浏览：次
微型电机马达的使用过程中,经常会有突然阻塞,如果这个问题不解决,很容易导致损坏电机,事实上,微电机堵塞是由各种各样的原因 ,寻找解决方案时找到正确的解决方案 。那么微型马达是如何防止堵塞的呢?
In the process of using Shandong micromotor motor, there is often sudden blocking. If this problem is not solved, it is easy to damage the motor. In fact, the blocking of micromotor is caused by various reasons. When looking for solutions, find the right solutions. So how do micromotors prevent clogging?
First, control current
微型电机移除过程中没有电流通过,只能将动能转化为热能,从而很容易导致电加热,热能的现象主要来源于电流增加,开放时间,电流大,阻 力非常小,所以我们需要设置当前的运动到适当的水平 。
In the process of removing micromotor, there is no current passing through, only kinetic energy can be converted into heat energy, which is easy to lead to electric heating. The phenomenon of heat energy mainly comes from the increase of current, opening time, large current and very small resistance, so we need to set the current movement to the appropriate level.
微电机在正常运行时电阻很高 。根据串联电阻原理，当串联电阻被阻断时，电动机的感应电阻很小，远远小于串联电阻 。因 此，串联电阻可以更好的保护电机和电池的电压 。
The resistance of micromotor is very high in normal operation. According to the principle of series resistance, when the series resistance is blocked, the induction resistance of the motor is very small, far less than the series resistance. Therefore, series resistance can better protect the voltage of motor and battery.
3 timely detection circuit
The detection of the circuit of micromotor is regular and frequent. Due to different seasons, use time and environment, the circuit has certain loss. We should check the circuit regularly to prevent the occurrence of circuit fault.
以上是微型电机厂家如何防止马达阻塞相关内容,事实上,只要发生阻塞的现象,只要及时找到原因 ,不难解决,正常使用的微型电动机,及时调整电机工作,从电流、电压和电阻 。
In fact, as long as the blocking phenomenon occurs, as long as the cause is found in time, it is not difficult to solve it. For the normal use of the micro motor, adjust the operation of the motor in time, from the current, voltage and resistance.
Copyright © 2018 济南美磁达电子有限公司 All Rights Reserved