来源：http://www. 发布时间：2019-05-10 浏览：次
1. The daily operation environment of garage doors should be dry and not in a humid environment. The appearance of motors should be clean, especially the air intake should not be hindered by impurities such as dust and fibers.
2、保证车库门电机在运转过程中有良好的光滑 。普通来说，车库门电机运转每5000小时左右，就要补充或改换光滑脂，若运转中发现轴承过热或光滑蜕变时，应及时液压或换光滑脂 。改换光滑脂时，应先肃清旧的光滑油，并用汽油洗净轴承及轴承盖的油槽，然后将光滑脂填充在轴承内外圈之间的空腔的1/2处 。
2. Ensure that the garage door motor has good smoothness in the operation process. Generally speaking, when the garage door motor runs every 5000 hours or so, it is necessary to replace or replace the smooth grease. If the bearing is found to be overheated or smooth degeneration in operation, it should be timely hydraulically or smoothly greased. When replacing the grease, the old grease should be removed first, and the oil groove of the bearing and bearing cover should be washed with gasoline, then the grease should be filled in one-second of the cavity between the inner and outer rings of the bearing.
3. Once it is found that the vibration and noise of motor running in garage doors increase significantly, it is clarified that the life of motor bearings has reached the limit. At this time, it is necessary to check whether the radial clearance of bearings can reach the relevant value and replace the new motor bearings in time.
4. When the thermal maintenance of the garage door motor is in continuous vibration, it is necessary to find out the direction of the fault first, to see whether the motor is overloaded or the setting value of maintenance and installation is too low, and to put it into normal operation after the fault is eliminated.
5、若车库门电机发作毛病，必需要拆卸时，轴伸端或非伸端处都能够取出转子 。南昌明和倡议大家，假如没有必要卸下风扇时，选择从非轴伸端取出转子更为便当 。若需求从定子中抽出转子时，应留意避免损坏定子的绕组或绝缘 。
5. If the garage door motor breaks down and needs to be disassembled, the rotor can be removed at the extension end or non-extension end of the shaft. Nanchang Minghe advocates that if it is not necessary to unload the fan, it is more convenient to remove the rotor from the non-axle extension end. If it is necessary to withdraw the rotor from the stator, care should be taken to avoid damaging the stator winding or insulation.
This article is dedicated by Shandong automatic door motor. For more knowledge, please click on: http://www. sincere attitude. To provide you with comprehensive services. More relevant knowledge will be dedicated to you one after another. Please look forward to it.
Copyright © 2018 济南美磁达电子有限公司 All Rights Reserved